Industrial rubber products, Manufacturing and sales of original rubber chemical [Preknead], Processing and sales of rubber compound|TECHNO PREKNEAD HIDA CO.,LTD.

Molding product

hose / boots

For car maker
EPDM 60° Boots
EPDM 60° Boots * Silencing processing by molding machining
For toilet maker
EPDM 70° Connecting elbow hose
For water heater maker
EPDM 60° Yarn reinforced hose
EPDM 70° Hose

Seal rubber (gasket, packing, grommet)

For communication maker
EPDM 3° gasket
EPDM 3° Drop seal
EPDM 3°+ 10° Hybrid gasket
* 2 hardness rubber combined molding
EPDM 10°+ 30° Drop seal rubber
* 2 hardness rubber combined molding
Silicon Hs 50° gasket

Low Hardness EPDM

  • Branch seal material
  • E0105NK-6
  • Mold of complex structure
  • Special material is used for thin wall part of the product.

  • Drop seal rubber
  • EPDM 10°+ 30°
  • Hardness two integrated molding

  • Hybrid gasket
  • ESA003 + E0105NK-6
  • Hardness two integrated molding

Normal StateESA190ESA190JESA307ESA001ESA003ESA001PESA003P
Hardness (JIS HS)0 (12)0 (17)0 (18)1313
Tensile Strength (MPa)0.61.52.01.52.11.73.0
Elongation (%)118010251045100010251300965
Specific Gravity0.950.930.910.950.950.920.94
Compression Set (%)34.437.930.730.928.143.637.6

* Rubber Sheet: Aging (180℃ - 5minutes), Rubber Ball: Aging (170℃ - 15minutes)
* Compression Set: Aging (70℃ - 22h)

Normal StateAD-8-24AD-9-20E0105NE0105NK-6ESA010AD-9AD-8
Hardness (JIS HS)461311131515
Tensile Strength (MPa)4.24.37.57.67.39.310.1
Elongation (%)11901120880940850840895
Specific Gravity1.001.000.960.960.951.031.04
Compression Set (%)23.520.920.416.514.019.917.0

* Rubber Sheet: Aging (180℃ - 5minutes), Rubber Ball: Aging (170℃ - 15minutes)
* Compression Set: Aging (70℃ - 22h)

Vulcanization adhension product with metal piece

  • EPDM 75° Bolt insert stay comp
    * Stay for mirror on bike
  • EPDM 90° Bolt insert stay comp
    * Stay for mirror on bike
  • EPDM 60° Vulcanization adhension product
    * Adhesion product with flat plate
  • EPDM 55° Vulcanization adhension product with metal piece
    * Entry plate
    * Metal insert product from 45 degree direction
  • Silicon Hs 40° Vulcanization adhension product with metal piece
    * Color matching product for car interior color

Caster

  • NR 60 Brown Caster for medical use
  • NR 60 Gray Caster for industrial use
  • NR 60 Caster for industrial use

For further information about our products, please contact us at the following address.

TECHNO PREKNEAD HIDA CO.,LTD.

445-6 Hikumi,Kawabe-cho,Kamo-gun,Gifu,JAPAN  Tel:+81-574-53-3046  Fax:+81-574-53-3054

Copyright © 2011 Techno Preknead HIDA All Rights Reserved.